MOTORUM Series -M2548TS / M2558TS

MOTORUM Series -M2548TS / M2558TS

Multiple Functions!, Power!, Speed! Combined increase productivity & profitability!

MOTORUM Series -M2048TS/M2558TS

Process Integration

  • Downward extrusion up to 2mm
  • Forming with upward thrust
  • In turret bending height as high as 20mm

Increased power delivers higher processing stability

  • Servo motor with 250 kN punching capacity

Servo Ram Drive

MURATEC , new concept of ram drive, was first introduced in punch press technology incorporated with toggle mechanism by servo motor. It has resulted in high productivity & eco-friendly work environment with minimum noise & hydraulic oil-less operation.

Increased speed raises productivity

  • Higher auto-index speed, to 180rpm
  • Faster hit rate, to 400hpm

In Turret Bending (Option)

New Drive Ram MechanismThe Ram-Axis servo drive allows precise stop positioning of the punch, which in turn gives accurate angle control, for Z-bending via index-station processing. Increase in turret feed clearance takes the in turret bending height to a maximum of 20mm.


Optimum control of RAM speed leads to fast and accurate forming of the highest quality, with work very minimal distortion.

Retractable forming die function (Option)

Retractable forming die function (Option)Upward forming tool dies are retracted out of the way of the work sheet movements when forming is not in operation to avoid interference of forming die with workpieces or workholders. This allows free fast movement of the sheet without any restrictions and improves quality.

Forming with upward thrust

Forming with upward thrust (Option together with in turret bending) (Option together with in turret bending)
Forming with thrust from below does not lift the work, allowing extrusion and other high-precision forming processes.

Basic Machine Specifications
Punching capacity
200 kN 25.5 Metric Tons 28.0 US Tons
Maximum sheet thickness
6.35 mm [0.250″]
Maximum sheet size without repositioning (Y x X)
1250 x 2500 mm | 1525 x 2500 mm
Hit rate( 1.0t,25 mm pitch,8.3 mm stroke )
400/300 hpm
Hit rate( 1.0t,1 mm pitch,8.3 mm stroke )
800/700 hpm
Punching accuracy
+/- 0.1 mm

Back to Top