Better form quality
NC controlled forming strokes for better precision
Slug suction unit for better parts quality (Option)
Tapping unit (Option)
Process Integration
Downward extrusion up to 2mm
Servo controlled upward forming
In turret bending height as high as 20mm
In Turret Bending (Option)
The servo drive allows precise stop positioning of the RAM punch, which in turn gives accurate angle control, for Z-bending via index-station processing. Increase in turret feed clearance takes the in turret bending height to a maximum of 20mm.
Stations used
Auto-index (F-Station)
Process types
L bend
C bend
Z bend
Sheet thickness: 0.5-1.6mm (SPCC)
Forming
Optimum control of RAM speed leads to fast and accurate forming of the highest quality, with minimal distortion of the workpiece.
Retractable forming die function (option)
Upward forming tool dies are retracted to die height when not in use. This is to avoid interference of the forming die with the workpiece and workholders. This allows free movement of the sheet without any restrictions and improves quality
Programmable up forming (Option together with in turret bending)
After lowering the punch onto the material, the servo controlled upward forming stroke will not lift the material. This improves accuracy on extrusion and other high precision forming processes.
Downward extrusion protection (option)
Conventional turret punch presses have long had difficulty with downward extrusion. As the formed work is lifted off the upper surface of the die during table/sheet movement, this option eliminates degradation of the form stemming from interference with the die.
