Muratec Turret Punch Press Motorum-2558

Main Links

Products > Muratec Turret Punch Press > MOTORUM-2044EZ

The Servo Motor Driven Punching Mechanism

The MURATEC RAM drive technology incorporates a toggle mechanism driven by an AC servo motor. This innovative technology has resulted in achieving higher productivity, an environment friendly operation, and energy efficient production. A single rotation of the crank arm gives two punching strokes.

The ram drive technology gives higher power at ram than motor generated power.

Ecology

Environment-friendly Design MOTORUM-2044EZ

In the MOTORUM-2044EZ, the punching energy is generated instantaneously using an advanced servo motor controlled ram drive. The ram servo motor consumes power only during the punching process, thus reducing running costs drastically.

Economy

Energy-efficient Operation

Hydraulic Oil-less Operation

The absence of a hydraulic unit on the MOTORUM-2044EZ gets rid off hydraulic unit and oil maintenance, disposal of waste oil and periodic oil replacement. This saves on hydraulic oil and maintenance costs, thus reducing running costs.

Energy Saving NC Control

The MOTORUM-2044EZ machine's LCD screen goes in energy saving mode when the NC keyboard is not in operation for a parametric set time period, The screen can be displayed again if any NC operation key is touched.

Easy to Operate

User-friendly Machine Operation

The MOTORUM-2044EZ incorporates all the basic necessary functions for sheet metal processing with simple operations for easy and quick machine utilization.

Quick Machine Start

The MOTORUM-2044EZ does not require machine warming-up cycle. The operator can start the production without waiting for the machine warming-up period like hydraulic or conventional machines.

Specifications

Specification		MOTORUM 2044ez
Punching capacity		20 ton [22 US ton]
Maximum sheet thickness		6.35 mm [0.25"]
Maximum sheet size (YxX)	Without repositioning	1250 mm x 1250 mm [49.21' x 49.21']
Hit rate	Punching: 25 mm pitch	220 HPM
	Nibbing: 1 mm pitch	600 HPM
Punching accuracy		+/- 0.1 mm [+/- 0.004"]
Power supply		19 KVA

Top