3D drawing created on an external CAD system can be imported to G4-Assembled data can be also imported.
Bending angle and bending R are automatically recognized when importing the original data. The registered bending allowance value is adopted to create the unfolded figure.
1) Data format to be imported SAT, STEP, IGES, Parasolid, Solidworks Various data format can be accepted. 2) Data of either solid or surface model is importable. (Wire frame model cannot be imported.)
CAMPATH G4 3D Unfolding functions
Import of Solid data
Fold projection
Create unfolded figure
Flange input
Add sheet / joint part
Check interference
Modification of Butted sheet / Doubled sheet
Add sheet / Cut and Trim sheet
Modification of bend line(s)
Move part
Dimension lines on 3D unfolding figure
